招標公告
項目
| 名稱 Goods Name | 主要技術參數 Main Technical Specification | 數量 Quantity | 單位 Unit | 交貨期及交貨地點 Term and Destination of Delivery | 備注 Comment |
| 救援井設計分析軟件及配套設備 Relief well design and analysis software and the supporting equipment | 所購軟件系統需具備工程數據庫、井身結構及管柱設計功能、套管強度校核功能、定向井設計功能、測斜分析、防碰掃描、流體力學分析、井控及波動壓力分析、扭矩/摩阻工程計算、卡鉆、固井設計、欠平衡水力學設計、套損分析、高級管柱分析計算及井下流體模擬、深水包及蒸汽模擬等功能，以及運行軟件所需的配套工作站。 The purchased software system should include functions such as Engineering Data Model, Casing and Tube Design, casing strength check, Directional well design, Inclination logging and Uncertainty, analysis, Collision avoidance scanning, Hydrodynamics analysis, Well control and fluctuation pressure analysis, Engineering calculation of torque / friction, Sticking, cementing design, under balanced hydraulic design, casing damage analysis, advanced string analysis and calculation, downhole fluid simulation, deep-water package and steam simulation, etc. And the supporting workstation needed to run the software. | 2 | 套 suite | 簽訂合同后3個月，天津塘沽渤海石油路688號中國海油井控中心 Within 3 months after signing the contract. CNOOC Well Control Center, No.688 Bohai Shiyou Road, Tanggu, Tianjin. | |
供貨明細表
| 序號 Seq. | 名稱/功能需求 Name / Function Requirement | 內容/規格 Contents/Specification | 數量 Counts | 單位 Counts | 備注 Counts |
| 1 | 救援井設計及分析軟件 Software for relief well design and analysis | | | | |
| 1.1 | 工程數據庫 Engineering Database | 詳見技術要求 Details in Requirement. | 4 | 套 Pcs. | |
| 1.2 | 井身結構與管柱設計功能 Well schematic & Tubular design | 詳見技術要求 Details in Requirement. | 2 | 套 Pcs. | |
| 1.3 | 定向井設計功能 Well path design | 詳見技術要求 Details in Requirement. | 2 | 套 Pcs. | |
| 1.4 | 鉆井工程設計和分析功能 Well engineering design & analysis | | | | |
| 1）流體力學基本設計 Hydraulics analysis | 進行水力學分析、工程計算 Hole cleaning, pressure loss, ECD, bit hydraulic parameters | 2 | 套 Pcs. | 詳見技術要求 Details in Requirement | |
| 2）流體力學高級設計 Advanced hydraulics | 進行井控計算分析、波動壓力分析 Well control, swab and surge analysis | 2 | 套 Pcs. | ||
| 3）鉆井力學基本分析計算 Well control, swab and surge analysis | 扭矩/摩阻計算、工程計算 Torque & drag, effective tension, hook load, with different operational case | 2 | 套 Pcs. | ||
| 4）鉆井力學高級分析計算 Advanced mechanics | 卡鉆、臨界轉速分析、BHA帶彎接頭分析、工程計算 Stuck pipe, critical RPM, stress on drill string in drilling | 2 | 套 Pcs. | ||
| 5）固井設計 Cementing design | 優化固井，含扶正器安放位置設計 Optimized cementing design, casing centralization | 2 | 套 Pcs. | ||
| 6）欠平衡水力學設計 Under balanced | 進行欠平衡水力學設計 Under balanced drilling design | 1 | 套 Pcs. | ||
| 7）套損分析 Casing wear analysis | 套損分析，考慮鉆柱旋轉對套管造成的磨損 Casing wear made by drill string | 1 | 套 Pcs. | ||
| 1.5 | 高級管柱設計分析應用功能 Advanced tubular design for HTHP wells | | | | |
| 1）高級管柱分析計算及井下流體模擬 Tubular analysis with thermal simulation | 詳見技術要求 Details in Requirement. | 2 | 套 Pcs. | | |
| 2）深水計算分析 VIT analysis in Deep water | 2 | 套 Pcs. | | ||
| 3）蒸汽計算分析 Steam analysis | 1 | 套 Pcs. | | ||
| 2 | 配套設備Supplementary Equipment | | | | |
| 2.1 | 塔式工作站（雙顯配置） Tower workstation （two monitors） | 詳見技術要求 Details in Requirement. | 2 | 套 Pcs. | |
| 2.2 | 移動工作站 Mobile workstation | 4 | 臺 Pcs. | | |
| 3 | 安裝及培訓 Installation & Training | 詳見技術要求 Details in Requirement. | 1 | 項 Pkg. | |
交貨期Delivery Schedule:
簽訂合同后3個月
3 months after signing the contract
交貨地點Destination of delivery：
境內：中國天津市濱海新區塘沽中海油井控中心
Cisborder:CNOOC Well Control Center, Tanggu, Binhai New Area, Tianjin, China
境外：中國天津市濱海新區塘沽中海油井控中心
Overseas: CNOOC Well Control Center, Tanggu, Binhai New Area, Tianjin, China
2. 對投標人的資格和業績要求：
Requirements for Qualification and reference of Bidder:
（1）資質要求及證明文件 Qualification requirements and supporting documents
1）承諾交貨時提供軟件著作權證書。Promise to provide software copyright certification upon delivery.
2）承諾交貨時提供軟件安裝手冊、使用說明書、軟件使用許可。 Promise to provide software： installation manual, instruction manual, license upon delivery.
3）承諾交貨時提供工作站使用說明書、產品合格證、保修卡和保修站點
4）如果投標人非軟件許可方，須提供軟件許可方的同意其在中國為本次投標提供該硬件或軟件許可的正式授權書。If the bidder is not a software licensor, a formal authorization from the hardware manufacturer or software licensor to license software in China for this bid shall be provided.
（2）業績要求：
Requirement for Bidder's reference:
所投標產品的軟件商在全球范圍（合同簽訂時間在2017年1月1日-2019年12月31日）銷售救援井涉及及分析軟件（具備鉆井?dāng)?shù)據庫、井身結構及管柱設計功能、定向井設計功能、流體力學分析、井控及波動壓力分析、扭矩/摩阻工程計算、卡鉆、固井設計、欠平衡水力學設計、套損分析、高級管柱分析計算及井下流體模擬、深水包及蒸汽模擬等功能）數量每年不少于2 套。投標人投標時，需提供銷售合同的關鍵頁復印件。
Bidding product by the software licensor in the global range (the contract signing time on January 1, 2017 - December 31, 2019) sales of Relief Well Design and Analysis Software (Functions including Drilling Data base, Casing and Tube Design, Directional well design, Hydrodynamics analysis, Well control and fluctuation pressure analysis, Engineering calculation of torque / friction, Sticking, cementing design, under balanced hydraulic design, casing damage analysis, advanced string analysis and calculation, downhole fluid simulation, deep-water package and steam simulation, etc..)number of not less than 2 sets of each year.When bidding, the bidder shall provide copies of key pages of the sales contract.
合同復印件必須至少體現以下內容：合同簽署時間、軟件名稱、供貨數量、主要功能（具備鉆井?dāng)?shù)據庫、井身結構及管柱設計功能、定向井設計功能、流體力學分析、井控及波動壓力分析、扭矩/摩阻工程計算、卡鉆、固井設計、欠平衡水力學設計、套損分析、高級管柱分析計算及井下流體模擬、深水包及蒸汽模擬等功能）和合同簽署頁。未提交業績證明文件，或所提供的業績證明文件無法驗證前述信息，均視為無效業績。
The copy of contract shall contain but not limited to: Contract signing time, software name, quantity, Main specifications(Functions including Drilling Data base, Casing and Tube Design, Directional well design, Hydrodynamics analysis, Well control and fluctuation pressure analysis, Engineering calculation of torque / friction, Sticking, cementing design, under balanced hydraulic design, casing damage analysis, advanced string analysis and calculation, downhole fluid simulation, deep-water package and steam simulation, etc..) functions and Contract signing page. Absence of the track records evidence documents or the failure to verify above foregoing information, that shall be counted as aninvalid performance.
3. 有興趣的投標人可通過以下方式獲取招標文件：從2020年4月14日開始至2020年4月21日止，請登錄中國海洋石油集團 采辦業務管理與交易系統（ ooc.com.cn）的招標公告頁面進行購買。首次登錄必須先進行注冊，注冊成功后，方可購買招標文件。購買過程必須全程在線操作，線下形式的匯款將不予接受。標書費支付成功后，投標人可自行下載招標文件。招標文件每套售價為2000元人民幣或350美元，售后不退。如未在系統中購買招標文件，不可參加投標。
The interested Bidders may obtain the bidding document by following method:Please login at CNOOC Procurement Operation System on the page of Invitation for bid for purchasing Bidding document from April.14, 2020to April 21, 2020. For the first time of login, a registration is needed and only after successful registration, Bidder canpurchase Bidding documents online. The whole purchasing process must be operated online and offline payment will not be accepted. After successful payment of RMB 2000.00 or USD 350.00 for each copy of Bidding documents which is non-refundable, Bidder may download the Bidding documents. Bidder fails to purchase Bidding documents online is not eligible to bid.
4. 投標文件遞交截止時間和
項目 聯系人：李楊
咨詢電話：010-51957458
傳真：010-51957412
手機：13683233285
QQ:1211306049
微信：Li13683233285 郵箱：1211306049@qq.com
備注：欲購買招標文件的潛在投標人,注冊網站并繳納因特網技術服務費后，查看項目業主，招標公告，中標公示等，并下載資格預審范圍，資質要求，招標清單，報名申請表等。為保證您能夠順利投標，具體要求及購買標書操作流程按公告詳細內容為準，以招標業主的解答為準本。
來源：中國電力招標采購網?編輯：cnooc